▷
Attach the antennas. You have the following options:
• Connect the supplied rod antennas on the rear side of the antenna
splitter. In this case, cover the antenna holes with the two covers (left
diagram).
• Attach the AM 2 antenna front mounting set (optional accessory) and
mount the rod antennas on the blanking plate (right diagram).
►
►
Slide the antenna splitter with the mounted blanking plate into the 19"
▷
rack.
Secure the mounting angle and the blanking plate to the 19" rack.
▷
▷
Align the mounted antennas in a V-shape.
Installing the ASA 214
71