Table of Contents
Advertisement
When you connect the RMS 1 remote mute switch you can only mute
the signal using this switch. The MUTE switch's function is deactivat-
ed during this time.
Advanced > MIC LED menu item
•
Configure the STATUS LED of the RMS 1 remote mute switch
►
In the MIC LED menu item you can configure and deactivate the STATUS
LED (see "Connecting the RMS 1 mute switch to the SK 300") of the RMS 1
remote mute switch regardless of the settings of the "Advanced > Mute
Mode menu item" and the status of the RF signal.
LED On:
setting
Unmute
•
The STATUS LED is illuminated when the bodypack transmitter is send-
ing an RF signal or is not muted.
LED On:
setting
Mute
•
The STATUS LED is illuminated when the bodypack transmitter is not
sending an RF signal or is muted.
Disable LED
setting
•
The STATUS LED is deactivated.
Using the SK 300 G4
161
Advertisement
Table of Contents
