Antenna Distribution And Mounting Packages - Sennheiser EK 100 G3 Comprehensive Manual

Antenna Distribution and Mounting Packages

Sennheiser has put together several antennas distribution packages to address common wireless
scenarios.
G3 OMNI KIT 4
Active splitter kit for four receiver
system using omnidirectional
remote paddle antennas, includes:
(1) ASA1/NT active splitter
(2) A1031-U antennas
(1) GA3 rack mount kit
G3 OMNI KIT 8
Active splitter kit for eight receiver
system using omnidirectional
remote paddle antennas, includes:
(2) ASA1/NT active splitters
(2) A1031-U antennas
(1) GA3 rack mount kit
(2) BB1 interconnect BNC cables
NOTe: The antennas supplied with all ew rack-mountable receivers are to be used only in chassis-mounted (rear
jacks), or in conjunction with the AM2 front-mounting kit. These are ground plane devices and are never to be
used as a remote antenna solution on the end of a cable.
The following items are not included with Sennheiser's antenna distribution kits.
You may require any of the following:
• L ow loss antenna cable to connect remote antennas to the antenna distribution
(cable length to suit the application)
• Mounting brackets for remote antennas
• Rack screws
• Additional GA3 rack-mount kits (not included with ew 100 G3 series systems)
16
G3 DIR KIT 4
Active splitter kit for four receiver
system using directional remote
paddle antennas, includes:
(1) ASA1/NT active splitter
(2) A2003-UHF antennas
(1) GA3 rack mount kit
G3 DIR KIT 8
Active splitter kit for eight receiver
system using directional remote
paddle antennas, includes:
(2) ASA1/NT active splitters
(2) A2003-UHF antennas
(1) GA3 rack mount kit
(2) BB1 interconnect BNC cables
G3 IEM DIR KIT 4
Active combiner kit for four IEM
transmitters with DC power
distribution, includes:
(1) AC3/NT active combiner
(1) A2003-UHF antennas
(1) GA3 rack mount kit
G3 FRONT KIT 4
Active splitter kit for four receiver
system using front-mount antennas,
includes:
(1) ASA1/NT active splitter
(1) AM2 front mount kit
(1) GA3 rack mount kit
G3 FRONT KIT 8
Active splitter kit for eight receiver
system using front-mount antennas,
includes:
(2) ASA1/NT active splitters
(1) AM2 front mount kit
(1) GA3 rack mount kit
(2) BB1 BNC interconnect cables