Table of Contents
Advertisement
Connecting antennas
To connect the supplied rod antennas:
▷
Connect the first rod antenna to the ANT I socket on the rear side of the
EM 300-500 G4.
Connect the second rod antenna to the ANT II socket on the rear side
▷
of the EM 300-500 G4.
Gently angle the rod antennas to the left and right as shown in the fig-
▷
ure.
If you are using more than one receiver, we recommend using remote
antennas and, as needed, Sennheiser antenna accessories. For more
information, visit the ew G4 product page at www.sennheiser.com.
Installing the EM 300-500 G4
32
Advertisement
Table of Contents
