Mounting A Single Antenna Combiner In A Rack - Sennheiser G4-A Instruction Manual

Mounting a single antenna combiner in a rack

To mount the antenna combiner in a rack, you will need the GA 3 rack
mounting kit (optional accessory).
To fasten the mounting angle of the GA 3 rack mounting kit:
Unscrew and remove the two recessed head screws (M4x8) on each
▷
side of the antenna combiner.
Secure the mounting angles to the sides of the antenna combiner using
▷
the previously removed recessed head screws.
►
▷ Secure the blanking plate to one of the mounting angles using two re-
cessed head screws (M6x10).
▷ Cover the antenna holes with the two covers.
►
▷ Slide the antenna combiner with the mounted blanking plate into the
19" rack.
Secure the mounting angle and the blanking plate to the 19" rack.
▷
Installing the AC 41
42