Storing Data Cartridges At External Locations - Fujitsu ETERNUS LT140 User Manual

Chapter 3 Setup Methods for Different Operations

3.2 Storing Data Cartridges at External Locations

5
The above setup enables the tape libraries assigned the same master key to share data
cartridges without any special settings and operations.
3.2 Storing Data Cartridges at External Locations
For disaster recovery, encrypted data cartridges can be stored externally, such as at an external warehouse,
and, when needed, brought back to read the data on them.
Make appropriate settings by following the procedure below.
Procedure
1
Set the license key of the Key Management Function Option of each tape library.
2
Assign a master key for the main tape library.
For information on how to set the master key, refer to
3
Export the set master key to the management console.
For information on how to export the master key, refer to
FUJITSU Storage ETERNUS LT140 Tape Library Key Management Function Option User's Guide
Management console
Tape library 01 Tape library 02
68
Copyright 2019 FUJITSU LIMITED
Tape library 03
End of procedure
"2.1.4 Setting the Master Key" (page
"2.1.4.2 Exporting the Master Key" (page
35).
37).
P3AG-3762-02ENZ0