Figure 2.3 Changing Passwords - Fujitsu ETERNUS LT140 User Manual

Chapter 2 Setup and Operation Procedures
2.1 Basic Setup
3
When the [Modify User Password] screen appears, enter the new password in both boxes.

Figure 2.3 Changing passwords

4
Click [Modify].
For password settings, passwords must satisfy the requirements. If the password setting does not succeed,
check the setting requirements from [Configuration > User Accounts > User Accounts Settings]. For details
about the setting items, refer to "3.4.16 Configuring Password Setting Requirements" in "FUJITSU Storage
ETERNUS LT140 Tape Library User's Guide -Panel Operation-".
2.1.2.2 Logging in to the Remote Panel
The procedure for logging in to the remote panel with the security administrator account is described below.
The security administrator has the following account name and initial password.
User (account name)
Password (initial password)
• For security purposes, changing the initial password after starting the library is recommended.
For details about how to change passwords, refer to
Administrator Account" (page
• When connecting to the remote panel, use Internet Explorer 10 or later.
FUJITSU Storage ETERNUS LT140 Tape Library Key Management Function Option User's Guide
security (alphabetical characters)
security (alphabetical characters)
"2.1.2.1 Changing the Initial Password of the Security
23).
24
Copyright 2019 FUJITSU LIMITED
End of procedure
P3AG-3762-02ENZ0