Switching To Single Sheets; Switching To Continuous Paper - Epson DLQ-3500 Quick Manual

Paper-Type Switching
When using the tractor, you can easily
switch between continuous paper and single
sheets (including envelopes or postcards)
without removing the continuous paper
from the tractor.

Switching to single sheets

Follow these steps to switch from
continuous paper to single sheets:
1. When you have finished printing on
continuous paper, press the Tear
Off/Special Paper button to advance
the paper to the tear-off position.
Note:
If the auto tear-off mode is turned on, the
printer advances the paper perforation to the
tear-off position automatically.
2. Tear off the printed pages.
c
Caution:
❏ Always tear off paper before
feeding it backwards; feeding too
many sheets backwards can
cause a paper jam.
❏ Never feed labels backward using
the Load/Eject button, Tear
Off/Special Paper button, or
knob on the right side of the
printer. Labels can easily peel off
their backing and jam the
printer. For information on
removing labels from the paper
path, see "Special Papers."
3. Press the Load/Eject button to feed the
continuous paper back to the standby
position. The paper is still attached to the
tractor, but is no longer in the paper
path.
EPSON DLQ-3500 Quick Guide
4. Select Manual/CSF as the paper source
on the control panel by pressing the
Paper Source button.
Now you can load single sheets from the
paper guide. See "Single Sheets with the
Paper Guide" for more information.

Switching to continuous paper

Follow these steps to switch from single
sheets to continuous paper:
1. If necessary, press the Load/Eject
button to eject the last printed single
sheet.
2. Make sure continuous paper is loaded in
the printer as described in "Loading
continuous paper."
Off Paper Source
al Paper
Tractor
ff
pe Manual/CSF
Paper-Type Switching (1/2)
Pau
3s
LF/F