Epson DLQ-3500 Quick Manual page 25

A3 for multipart stationery
Hide thumbs Also See for DLQ-3500:
Table of Contents

Advertisement

2. Make sure that Manual/CSF is selected
as the paper source on the control panel.
If not, select it by pressing the Paper
Source button.
3. Select Envelope on the control panel by
pressing the Tear Off/Special Paper
button.
4. Load envelopes following the
instructions in "Single Sheets with the
Paper Guide," "Single Sheets with the
Cut-Sheet Feeder" or "Single Sheets
with the Automatic Sheet Alignment
Unit." Be sure to fold the flap and be
careful of the flap's orientation.
from the paper guide
* top edge first and flap side down
Postcards
You can print on a variety of postcards by
loading them the same way you load single
sheets from the paper guide or with the
optional cut-sheet feeder or optional
automatic sheet alignment unit.
Follow these steps to load postcards.
c
Caution:
Use postcards only under normal
operating conditions.
EPSON DLQ-3500 Quick Guide
1. Make sure that your software settings
keep the printing entirely within the
printable area. See "Printable area" in
the Reference Guide for more
information.
c
Caution:
Printing on the edge of a postcard can
damage the print head.
2. Make sure that Manual/CSF is selected
as the paper source on the control panel.
If not, select it by pressing the Paper
Source button.
3. Select Card on the control panel by
pressing the Tear Off/Special Paper
button.
4. Load cards following the instructions in
"Single Sheets with the Paper Guide,"
"Single Sheets with the Cut-Sheet
Feeder" or "Single Sheets with the
Automatic Sheet Alignment Unit."
from the paper guide
* guide mark
Special Papers (6/6)

Advertisement

Table of Contents
loading

Table of Contents