Epson FX-2190 Reference Manual page 10

❏ Except as specifically explained in this guide, do not attempt
to service the printer yourself.
❏ Unplug the printer and refer servicing to qualified service
personnel under the following conditions:
i. If the power cord or plug is damaged.
ii. If liquid has entered the printer.
iii. If the printer has been dropped or the cabinet damaged.
iv. If the printer does not operate normally or exhibits a
distinct change in performance.
❏ Adjust only those controls that are covered by the operating
instructions.
❏ If you plan to use the printer in Germany, observe the
following:
To provide adequate short-circuit protection and
over-current protection for this printer, the building
installation must be protected by a 10- or 16-amp circuit
breaker.
When Handling the paper
❏ Never use the knob to adjust, move, or eject paper; this may
damage the printer or cause it to lose the top-of-form position
❏ Use the knob on the left side of the printer to clear paper jams
only when the printer is off. Otherwise, you may damage the
printer or change the top-of-form or tear-off position.
❏ Never press the Load/Eject or Tear Off/Bin button when you
are using the pull tractor; the paper could come off the pull
tractor and jam the printer.
4 Safety Instructions