Epson FX-2190 Reference Manual page 118

5
6
7
112 Control Panel
Tear Off/Bin button
❏ Feeds continuous paper forward to the tear-off
position.
❏ Feeds continuous paper backward from the tear-off
position to the top-of-form position.
❏ Selects a cut-sheet feeder bin when the cut-sheet
feeder is installed.
Tear Off/Bin lights
❏ Both of the two lights flash when continuous paper
is in the tear-off position, and both of the lights are
off when continuous paper is not in the tear-off
position.
❏ The left light is on when Card mode is selected.
❏ Both the lights are off when bin 1 of the optional
cut-sheet feeder is selected.
❏ The right light is on when bin 2 of the optional
cut-sheet feeder is selected.
Menu
When you press the Pitch and Tear Off/Bin buttons at
the same time, the printer enters the default setting
mode and you can set the various printer settings. See
"About Your Printer's Default Settings" on page 116.
Set button
When the printer enters the default setting mode, you
can press the Tear Off/Bin button to set the setting
which is selected.