Clearing Paper Jams; Aligning Vertical Lines In Your Printout - Epson FX-2190 Reference Manual

9-pin dot matrix printer
Hide thumbs Also See for FX-2190:
Table of Contents

Advertisement

Clearing Paper Jams

Follow these steps to clear a paper jam:
1. Turn off the printer. The printer is off when the power switch
is pressed down to the N side.
2. Open the printer cover.
3. If continuous paper is jammed in the printer, tear off the fresh
supply at the perforation nearest the paper entry slot.
4. Turn the knob on the left side of the printer away from you to
remove the paper in the printer. Remove any remaining
pieces of paper.
If the paper is stuck where the printer ejects it, gently pull the
paper out of the printer.
Caution:
c
Use the knob on the left side of the printer to clear paper jams
only when the printer is off. Otherwise, you may damage the
printer or change the top-of-form or tear-off position.
5. Close the printer cover and turn on the printer. Make sure the
Paper Out light is not flashing and the Pause light is off.

Aligning Vertical Lines in Your Printout

If you notice that the vertical lines in your printout are not
properly aligned, you can use the printer's bidirectional
adjustment mode to correct this problem.
Problem Solver
5
5
5
5
5
5
5
5
5
5
5
5
151

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fx-890aFx-2190nFx-890

Table of Contents