Epson FX-2190 Reference Manual page 143

Cause
Paper is too long.
The paper does not feed properly with the optional cut-sheet
feeder.
Cause
The cut-sheet feeder is not
installed properly.
Too many sheets are loaded in
the cut-sheet feeder. You
cannot load more than 150
sheets of paper in the
high-capacity cut-sheet feeder.
The edge guides of the
cut-sheet feeder are not
positioned correctly.
There is only one sheet left in
the bin.
The printer does not load continuous paper or does not feed it
properly.
Cause
The paper release lever is not
set correctly.
What to do
Press the Load/Eject button to eject the
sheet. Make sure the page length of your
paper is within the range specified for
single-sheet paper in "Paper" on page
213. Also check and adjust the paper size
setting in your application or printer
driver.
What to do
Reinstall it as described in "Installing the
cut-sheet feeder" on page 172.
Load less than 150 sheets of paper. See
"Cut-Sheet Feeder" on page 171 for
more information.
Align the left edge guide with the arrow
mark, then move the right edge guide to
match your paper's width.
Add more paper to the cut-sheet feeder.
What to do
Set the paper release lever to the position
for the paper source you want to use. See
"Setting the Paper Release Lever" on
page 14 for instructions.
Problem Solver
5
5
5
5
5
5
5
5
5
5
5
5
137