Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the A+ Server 2022TC-HTRF4.
Installation and maintainance should be performed by experienced technicians only.
The A+ Server 2022TC-HTRF4 is a high-end server based on the SC827H-R1620BP
2U rackmount chassis and the dual processor H8DCT-HLN4F serverboard.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with the
server system and describes the main features of the H8DCT-HLN4F serverboard
and the SC827H-R1620BP chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the A+ Server 2022TC-HTRF4
into a rack and check out the server configuration prior to powering up the system.
If your server was ordered without processor and memory components, this chapter
will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: Warning Statements for AC Systems
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
A+ Server 2022TC-HTRF4.
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the H8DCT-HLN4F serverboard,
including the locations and functions of connections, headers and jumpers. Refer
to this chapter when adding or removing processors or main memory and when
reconfiguring the serverboard.
Preface
iii
Preface
Advertisement
Table of Contents
