AT&T BL103-1K Complete User's Manual page 71

Multiple handset use
Intercom
Using the telephone base:
1. Press INT on the telephone base.
-OR-
Press MENU/
idle mode, then press
Intercom. Press
2. Press or
CID
telephone base shows Calling HS X (X
represents the handset number). The destination handset
rings and shows Base is calling.
To answer an intercom call with the telephone base:
Press /HOME,
f
or QUIET#) on the telephone base. Both devices now
show Intercom.
To end an intercom call with the telephone base:
Press CANCEL on the telephone base.
f
Notes:
For cordless headsets, refer to the corresponding user's manual on how to answer and end an intercom call.
f
If the destination device does not answer the intercom call within 100 seconds, or if the device is in use, on a call,
f
or out of range, the initiating telephone base displays No answer, try again, or the initiating handset displays
Unable to call, and returns to idle mode.
To temporarily silence the intercom ringer, press
f
headset, or press CANCEL on the telephone base.
You can only use one pair of devices at a time to make intercom calls.
f
on the telephone base in
SELECT
or
CID
/SELECT .
MENU
to select a device. The
DIR
/CELL or any dialing key (0-9, TONE
to highlight
DIR
OFF/CANCEL or MUTE/
65
INTERCOM TO:
HANDSET
>
Calling
HANDSET 1
on the destination handset/
DELETE
1