Removing Starter (Electromagnetic Drive Type) - Kubota WSM 05-E4B Series Workshop Manual

4. ENGINE
11. Lightly secure the rotor with a vise to prevent damage, and remove the bearing (7) with a puller.
(1) Pulley
(2) Drive end frame
(3) Stator
(4) Bearing
(When reassembling)
• Tighten to the specified tightening torque.
Tightening torque

5.30 Removing starter (Electromagnetic drive type)

NOTE
• Do not damage to the brush and commutator.
1. Remove the C terminal nut (7), and disconnect the connecting lead (12).
4-46
(5) Retainer plate
(6) Rotor
(7) Bearing
(8) Rear end frame
Pulley nut
5. Disassembling and assembling
(9) Rectifier
(10) IC regulator
(11) Brush holder
(12) Rear end cover
58.4 to 78.9 N⋅m
5.95 to 8.05 kgf⋅m
43.1 to 58.2 lbf⋅ft
SERVICING
05-E4B SERIES,05-E4BG SERIES
KiSC issued 03, 2023 A