Change Your Password - ZyXEL Communications ZyXEL Dimension GS-4012F User Manual

GS-4012F/4024 User's Guide
Table 5 Navigation Panel Links (continued)
LINK
DVMRP
IP Multicast
DiffServ
DHCP
VRRP
Management
Maintenance
Access Control
Diagnostic
Cluster
Management
MAC Table
IP Table
ARP Table
Routing Table

4.3.1 Change Your Password

After you log in for the first time, it is recommended you change the default administrator
password. Click Management, Access Control and then Logins to display the next screen.
54
DESCRIPTION
This link takes you to a screen where you can configure the DVMRP (Distance
Vector Multicast Routing Protocol) settings.
This link takes you to a screen where you can configure the switch to remove VLAN
tags from IP multicast packets on an out-going port.
This link takes you to screens where you can enable DiffServ, configure marking
rules and set DSCP-to-IEEE802.1p mappings.
This link takes you to a screen where you can configure the DHCP settings.
This link takes you to screens where you can configure redundant virtual router for
your network.
This link takes you to screens where you can perform firmware and configuration
file maintenance as well as reboot the system.
This link takes you to screens where you can change the system login password
and configure SNMP and remote management.
This link takes you to screens where you can view system logs and test port(s).
This link takes you to a screen where you can configure clustering management
and view its status.
This link takes you to a screen where you can view the MAC addresses (and types)
of devices attached to what ports and VLAN IDs.
This link takes you to a screen where you can view the IP addresses (and types) of
devices attached to what ports and VLAN IDs.
This link takes you to a screen where you can view the MAC addresses – IP
address resolution table.
This link takes you to a screen where you can view the routing table.
Chapter 4 The Web Configurator