Table of Contents
Advertisement
2
Select the authentication method.
[Open System]
Uses open authentication.
* When you select this authentication method, an authentication error occurs when connected to a
wireless LAN router that uses a shared key. The machine setting changes to [Shared Key] at this time, and
an attempt to reconnect to the router is made.
[Shared Key]
Uses an encryption key for the password.
3
Select [Edit Encryption Key] and press
4
Select an encryption key that is not registered, and press
➠
The encryption key input screen is displayed.
5
Enter the network key, select [<Apply>], and press
➠
The encryption key is registered to the [Encryption Key] screen.
6
Select [Select Encryption Key] and press
7
Select a registered encryption key, and press
When Using WPA-PSK or WPA2-PSK
1
Select [WPA/WPA2-PSK] and press
➠
The [WPA/WPA2 Encryption] screen is displayed.
2
Select the encryption method and press
➠
The encryption key input screen is displayed.
When you select [Auto], AES-CCMP or TKIP is set automatically according to the wireless LAN router to
which you want to connect.
3
Enter the network key, select [<Apply>], and press
When Using WPA-EAP or WPA2-EAP
Select [WPA/WPA2-EAP] and press
When Not Using a Security Standard
Select [None] and press
7
Select [Yes] and press
8
When [Connected.] is displayed on the operation panel, press
➠
When the machine is connected to the wireless LAN, [
Setting Up
.
.
.
.
.
.
.
.
48
.
.
.
] appears on the [Home] screen.
.
Advertisement
Table of Contents
