Table of Contents
Advertisement
Setting Up
After installing the machine, configure the required settings to enable use of the functions by performing the following
steps.
Steps 1 and 2 are the machine settings.
Step 3 is the setting for using the machine from a computer. Configure this setting for each computer using the
machine.
When you turn ON the machine for the first time, the screen (Setup Guide) for setting the
Step 1
items required for using the machine is displayed. Configure the settings by following the
instructions on the screen.
Step 2
Step 3
◼
See Also
Implementing Measures to Prevent Unauthorized Access
It is important to provide measures against security risks when using the machine in a network environment.
Check examples of measures that you can take with the machine.
Measures to Prevent Unauthorized Access(P. 5)
Checking Available Functions
The functions available on the machine vary depending on the model. Check the functions that are available
on your model.
Supported Functions(P. 3)
Configuring the Settings Required to Use the Functions of the Machine
Additional settings may be required depending on your model. For details about the settings required for
each function, see the following:
Printing Preparations(P. 102)
Preparations for Linking with Mobile Devices(P. 126)
Configuring the Default Settings (Setup Guide)(P. 31)
Configure the network settings not included in the Setup Guide.
If you did not connect to the network using the Setup Guide, do that during this step.
Setting Up the Network(P. 34)
Install the software required to use the machine and printer driver on your computer.
Installing Software and Drivers to the Computer(P. 69)
Setting Up
30
95LW-00U
Advertisement
Table of Contents
