Table of Contents
Advertisement
[Millimeter/Inch Entry Switch]
[Menu]
[Preferences]
Change the units shown on the screen for entering length and width.
[Millimeter]
[Inch]
[Displ. Timing for Cartridge Prep. Notif.]
[Menu]
[Preferences]
When the toner in a toner cartridge runs low, a message appears notifying you to prepare a new toner cartridge. To
manually specify when this message appears (the toner level in a cartridge), specify the timing in [Custom].
When [Auto] is enabled, the machine automatically decides when to display the message.
[Auto]
[Custom]
2 to
20
to 99 (%)
[Show Warnings]
[Menu]
[Preferences]
Specify whether a notification message is displayed when a toner cartridge is low on toner.
* If the machine is configured to stop printing when a toner cartridge is low on toner, this cannot be set to [Off].
[Action When Warning](P. 199)
[Low Cartridge Level]
[Off]
[On]
[Action When Warning]
[Menu]
[Preferences]
Specify whether to continue printing when a toner cartridge is low on toner.
If this is set to [Stop Printing], a notification message appears when the toner cartridge runs low on toner.
Warnings](P. 199)
[Low Cartridge Level]
[Continue
Printing]
[Stop Printing]
[Display IP Address]
[Menu]
[Preferences]
Specify whether to display the machine's IPv4 address in the [Status Monitor] screen.
Screen(P. 82)
Settings Menu Items
[Display Settings]
[Display Settings]
[Display Settings]
[Display Settings]
[Display Settings]
199
[Show
[Status Monitor]
Advertisement
Table of Contents
