Restricting Use Of Remote Ui - Canon imageCLASS LBP121dn User Manual

Restricting Use of Remote UI

While Remote UI is convenient for operating the machine from a computer, it also poses a risk of third-party access to
the machine.
You can configure the setting to require users to enter a PIN (Remote UI Access PIN) when using Remote UI to prevent
unauthorized access by a third party.
If you do not use Remote UI, it is recommended that you disable the function.
Setting the PIN to Use for Remote UI(P. 168)
Disabling Remote UI(P. 168)
Setting the PIN to Use for Remote UI
You can restrict the use of Remote UI to only those users who know the Remote UI Access PIN.
This section describes how to configure the settings using the operation panel.
You can also configure the settings using Remote UI from a computer after the Remote UI Access PIN has been set on
the machine. Managing the Machine from a Computer (Remote UI)(P. 178)
Administrator privileges are required.
1
On the operation panel, select [Menu] in the [Home] screen, and press
Screen(P. 81)
2
Press [Management Settings]
[Remote UI Settings]
➠
The [RUI Access Security] screen is displayed.
If the login screen appears, enter the System Manager ID and PIN, and then press
ID and PIN(P. 4)
3
Set [Remote UI Access Security Settings] to [On], enter the Remote UI Access PIN, and
press .
4
Enter the same number, and press
➠
The settings are applied.
When [Management Settings] of the Settings Menu Is Initialized
● Use the settings menu on the operation panel to reset the Remote UI Access PIN.
Security Settings](P. 245)
Disabling Remote UI
You can disable Remote UI to reduce the risk of unauthorized access to the machine via the network.
Security
[Remote UI Settings/Update Firmware]
[Remote UI Access Security Settings]
.
168
95LW-045
. [Home]
.
. System Manager
[Remote UI Access