Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
Steps
1. Slide the middle frame onto the display-assembly base.
2. Snap the middle frame and display-assembly base into place.
3. Replace the 13 screws (M3x5 black) that secure the middle frame to the display-assembly base.
Post-requisites
Steps
1. Replace the
rubber
feet.
2. Replace the
display
panel.
3. Replace the
system
board.
4. Replace the speakers.
5. Replace the
heat
sink.
6. Replace the fan.
7. Replace the
coin-cell
battery.
8. Replace the camera.
9. Replace the microphone.
10. Replace the
power-button
11. Replace the
media-card
12. Replace the antenna.
13. Replace the
wireless
card.
14. Replace the
memory
module.
15. Replace the
system-board
16. Replace the
hard
drive.
17. Replace the
back
cover.
18. Replace the stand.
60
Replacing the middle frame
Replacing the middle frame
computer. After working inside your computer, follow the instructions in
board.
reader.
shield.
38
After
www.dell.com/
Advertisement
Table of Contents
