Replacing The Middle Frame; Procedure - Dell Inspiron 24 5000 Service Manual

Identifier
Status
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Procedure

1 Starting from the location shown, slide and align the middle frame to the slots on the display-assembly base, and then snap the middle
frame into place on the display-assembly base.
2 Replace the 17 screws (M3x5) that secure the middle frame to the display-assembly base.
NOTE: The screws that secure the middle frame to the display-assembly base are black in color and etched with "BP"
around the screw holes.
GUID-27CA34A0-72DA-4F52-8342-74BFFC6F3B92
Released

Replacing the middle frame

computer. After working inside your computer, follow the instructions in
GUID-ADA10CCA-A2FD-48B3-90FB-9D2AE4F8497A
Released
51
After working inside
www.dell.com/
Replacing the middle frame 103