NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Steps
1. Remove the stand.
2. Remove the
back
cover.
3. Remove the
system-board
Procedure
Steps
1. Locate the memory module on the system board.
2. Using your fingertips, spread apart the securing clips at each end of the memory-module slot until the memory module pops
up.
3. Slide and remove the memory module from the memory-module slot.
NOTE:
Remove the DIMM1, and then remove the DIMM2.
Removing the memory module
computer. After working inside your computer, follow the instructions in
shield.
www.dell.com/
Removing the memory module
11
After
21