Chapter 40: Replacing The Rubber Feet; Procedure; Post-Requisites - Dell W19B001 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

Steps
1. Align the screw holes on the rubber feet with the screw holes on the display-assembly base.
2. Replace the four screws (M3x5 black) that secure the rubber feet to the display-assembly base.

Post-requisites

Steps
1. Replace the back cover.
2. Replace the stand.
62 Replacing the rubber feet
Replacing the rubber feet
computer. After working inside your computer, follow the instructions in
40
After
www.dell.com/