Chapter 9: Removing The System-Board Shield; Prerequisites; Procedure - Dell W19B001 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

Steps
1. Remove the stand.
2. Remove the back cover.

Procedure

Steps
1. Remove the five screws (M3x5) that secure the system-board shield to the display-assembly base.
2. Use the handle to lift the system-board shield off the display-assembly base.
Removing the system-board shield
computer. After working inside your computer, follow the instructions in
Removing the system-board shield
9
After
www.dell.com/
19