Table of Contents
Advertisement
8. Be sure the parts of the Dumbbell Handle Assembly have not become loose. Do this by setting the Adjustment Grip to 2.3 kg (5 lbs) and
removing the Handle Assembly from the Base. Grasp the Handle Assembly by the ends and twist it by rotating the end caps in opposite
directions. The Handle Assembly should not exhibit any free play and all of the Selection Discs should feel tightly connected.
9. You have now tested the function of the locking mechanism. We suggest you repeat this test monthly to make sure that the locking
mechanism operates correctly.
Do not use the Handle Assembly to lift the Dumbbell and Base together. To lift the Dumbbell and Base together, fully engage the
Weight Plates and use the Lifting Handles molded into the Base Assembly.
If the dumbbell locking mechanism operates unsatisfactorily in the test procedure above, do the following:
a. Stop use of the product immediately until approved service is available.
b. If purchased in US/Canada, contact the retailer or Customer Service for service. If purchased outside US/Canada, contact your local
distributor for assistance.
Optional Accessories
Bowflex™ SelectTech™ Stand
10
Assembly / Owner's Manual
Advertisement
Table of Contents
