Table of Contents
Advertisement
12
BRAKE SYSTEM
12.10
Checking the rear brake fluid level
Warning
Danger of accidents Brake system failure.
–
If the brake fluid level drops below the specified marking or the specified value, this is an indication that the brake system is
leaking or that the brake linings are completely worn down. Check the brake system and do not continue riding. (Your autho-
rized Husqvarna workshop will be glad to help.)
Warning
Danger of accidents Reduced braking efficiency due to old brake fluid.
–
Change the brake fluid of the front and rear brake according to the service schedule. (Your authorized Husqvarna workshop
will be glad to help.)
12.11
Adding rear brake fluid
Warning
Danger of accidents Brake system failure.
–
If the brake fluid level drops below the specified marking or the specified value, this is an indication that the brake system is
leaking or that the brake linings are completely worn down. Check the brake system and do not continue riding. (Your autho-
rized Husqvarna workshop will be glad to help.)
–
Disconnect spring
–
Loosen nut
travel.
–
To adjust the basic position of the foot brake lever individually, loosen nut
turn screw
Info
The range of adjustment is limited.
–
Turn push rod
basic position of the foot brake lever.
Guideline
Free travel at foot brake lever
–
Hold push rod
Guideline
Remaining nuts, chassis
–
Hold screw
Guideline
M00285-10
Nut, foot brake lever stop
–
Reconnect spring
Preparatory work
–
Check the rear brake linings. (
Main work
–
Stand the vehicle upright.
–
Check the brake fluid level in level viewer
»
If the brake fluid has dropped below marking
–
Add rear brake fluid.
B01902-10
.
and, with push rod
accordingly.
accordingly until you have free travel
and tighten nut
.
and tighten nut
.
.
p. 62)
(
p. 61)
, turn it back until you have maximum free
. If necessary, adjust the
3... 5 mm (0.12... 0.2 in)
M6
10 Nm (7.4 lbf ft)
M8
20 Nm (14.8 lbf ft)
.
:
61
and
Advertisement
Table of Contents
