1
INTRODUCTION
The contents described in this chapter must be read before using this product.
Always read the instructions before use.
Abbreviations
Item
DU
Operation panel
Parameter unit
PU
Inverter
Converter unit
Vector control compatible option FR-A8AP/FR-A8AL/FR-A8APA (plug-in option), FR-A8TP (control terminal option)
Pr.
PU operation
External operation
Combined operation
Notes on descriptions in this Instruction Manual
• Connection diagrams in this Instruction Manual appear with the control logic of the input terminals as sink logic, unless
otherwise specified. (For the control logic, refer to
• Descriptions in this Instruction Manual assume 6-phase rectification. For 12-phase rectification, the FR-A8CW (wire
connection attachment) is required. For the installation method of the FR-A8CW and the wiring method for 12-phase
rectification, refer to the Option Installation Manual.
12
1. INTRODUCTION
Operation panel (FR-DU08)
Operation panel (FR-DU08) and LCD operation panel (FR-LU08)
Parameter unit (FR-PU07)
Operation panel and parameter unit
Mitsubishi Electric FR-A802-P inverter (separated converter type for parallel operation)
FR-CC2-P converter unit (for parallel operation)
Parameter number (Number assigned to function)
Operation using the PU (operation panel / parameter unit)
Operation using the control circuit signals
Combined operation using the PU (operation panel / parameter unit) and External operation
page
Description
53.)