H3C S6850 Series Manual page 20

(17) Copper management Ethernet port LED (ACT)
(18) System status LED (SYS)
The ESN serial number and MAC address of the S9850-32H switch can be found on the serial label
pull tab.
The S9850-32H switch comes with power module slot PWR1 empty and power module slot PWR2
installed with a filler panel. You can install one or two power modules for the switch as needed. In
Figure2-14, two LSVM1AC650 power modules are installed in the power module slots.
The S9850-32H switch comes with the five fan tray slots empty. You must install five fan trays of the
same model for the switch. In Figure2-14, five LSWM1FANSA fan trays are installed in the fan tray
slots.
The S9850-32H switch supports shipping with fan trays and power modules installed. To purchase a
switch preinstalled with fans trays and power modules, contact marketing staff.
Figure2-15 S9850-32H left panel
1 2 3
6
(1) Power module handle
(3) Primary grounding point
(5) Chassis ear position at the port side
(19) Copper management Ethernet port LED (LINK)
(2) Chassis ear position at the power module side
(4) Auxiliary grounding point
(6) Fan tray handle
2-19
4 5