S6850-2C - H3C S6850 Series Manual

S6850-2C

Figure2-7 S6850-2C front panel
(1) Expansion module 1
Figure2-8 S6850-2C rear panel
1
2
3
4
16
17
15
18
19
(1) Mini USB console port
(3) Serial console port
(5) Two 40GE/100GE QSFP28 Ethernet fiber ports
(7) Fan tray 1
(9) Fan tray 3
(11) Fan tray 5
(13) Power module 2
(15) Fiber management Ethernet port LED (LINK/ACT)
(16) Fiber management Ethernet port (numbered 1)
(18) System status LED (SYS)
The ESN serial number and MAC address of the S6850-2C switch can be found on the serial label
pull tab.
The S6850-2C switch comes with expansion slot 1 empty and expansion slot 2 installed with a filler
panel. You can install one or two expansion modules for the switch as needed. In Figure2-7, two
LSWM18CQ interface modules are installed in the expansion slots.
The S6850-2C switch comes with power module slot PWR1 empty and power module slot PWR2
installed with a filler panel. You can install one or two power modules for the switch as needed. In
Figure2-8, two LSVM1AC650 power modules are installed in the power module slots.
The S6850-2C switch comes with the five fan tray slots empty. You must install five fan trays of the
same model for the switch. In Figure2-8, five LSWM1FANSA fan trays are installed in the fan tray
slots.
The S6850-2C switch supports shipping with fan trays and power modules installed. To purchase a
switch preinstalled with fans trays and power modules, contact marketing staff.
5 6 7 8
14
1
(2) Expansion module 2
9 10 11
(2) Copper management Ethernet port (numbered 0)
(4) USB port
(6) Serial label pull tab
(8) Fan tray 2
(10) Fan tray 4
(12) Power module 1
(14) QSFP28 port LED
(17) Copper management Ethernet port LED (ACT)
(19) Copper management Ethernet port LED (LINK)
2-15
2
12 13