Power Status Led; Mode Led; Management Ethernet Port Led - H3C S5170-EI Series Hardware Information

Table4-13 AC power status LED description
LED mark
PWR1/PWR2

Power status LED

The power status LEDs show the operating status of power supply 1 (PWR1) and power supply 2
(PWR2), respectively.
Table4-14 Power status LED description
LED mark
PWR1/PWR2

MODE LED

For the switch model that has a mode button, the mode LED (MODE) works in conjunction with the
port status LEDs to show more information about the switch.
The mode LED indicates the type of information that the port status LEDs are showing.
You can use the mode button to change the indication of the mode LED. After you press the mode
button to change the mode LED status into flashing yellow, the mode LED keeps that state for only
60 seconds and then turns steady green automatically.
Table4-15 Mode LED description
LED mark
MODE

Management Ethernet port LED

Table4-16 Management Ethernet port LED description
LED mark
MGMT
Status Description
Steady green Normal AC power input
Off Abnormal or no AC power input
Status Description
Steady green The power supply is present and operating correctly.
Steady yellow The power supply is present, but it is not operating or has failed.
Off No power supply is present.
Status Description
Steady green The port status LEDs indicate link state of the ports.
Flashing green
(available only for The port status LEDs indicate the PoE status of the ports.
PoE switches)
The port status LEDs indicate the IRF member ID of the switch. For
Flashing yellow
example, if the LEDs for ports 1 to 4 are steady green and the other
LEDs are off, the IRF member ID of the switch is 4.
Management Ethernet port LED status
Steady green
Flashing green
Off
Description
A link is present on the port.
The port is sending or receiving data.
No link is present on the port.