Fan-40B-1-C/Fan-40F-1-D; Expansion Modules - H3C S6850 Series Manual

FAN-40B-1-C/FAN-40F-1-D

Figure3-9 FAN-40B-1-C/FAN-40F-1-D fan tray
For information about the LED, see
Features
The FAN-40B-1-C fan tray draws air from the port side to the power module side. The FAN-40F-1-D
fan tray blows air from the power module side to the port side. The fan tray is small, hot swappable,
and can automatically adjust the fan speed according to the device temperature.
Technical specifications
Table3-12 FAN-40B-1-C/FAN-40F-1-D fan tray specifications
Item
Dimensions (H × W × D)
Weight
Airflow direction
Max fan speed
Max airflow
Input voltage
Max power consumption

Expansion modules

The S6850-2C switch provides two expansion slots. The S9850-4C switch provides four expansion
slots. Select expansion modules for the switch as required.
You can install an expansion module in any expansion slot on an S6850-2C or S9850-4C switch.
You can install or remove an expansion card when the switch is operating correctly. Do not install or
remove an expansion card on a starting switch.
Table3-13 Interface modules available for the S6850-2C and S9850-4C switches
Interface module
model
LSWM18CQ
LSWM18CQMSEC
"Fan tray alarm
FAN-40B-1-C
40 × 40 × 136 mm (1.57 × 1.57 × 5.35
in), including the handle
0.12 kg (0.26 lb)
Air exhausted from the fan tray
faceplate
29000 R.P.M
3
38 CFM (1.08 m /min)
12 V
60 W
Description
8-port QSFP28 interface module
8-port QSFP28 interface module with
3-31
LEDs."
FAN-40F-1-D
40 × 40 × 136 mm (1.57 × 1.57 × 5.35
in), including the handle
0.12 kg (0.26 lb)
Air drawn in from the fan tray faceplate
50.4 W
Interface number and type
8 × QSFP28 ports
8 × QSFP28 ports