6
Cooling system
CAUTION:
The chassis and power modules use separate air aisles. Make sure the two aisles are not blocked
when the switch is operating.
To dissipate heat timely and ensure system stability, the switch uses the front-rear air aisle cooling
system. Consider the site ventilation design when you plan the installation site for the switch.
Table6-1 Cooling system for the switch
Switch model
•
S6850-56HF
•
S6850-56HF-
SAN
•
S6850-2C
•
S9850-32H
S9850-4C
Available fan trays
LSWM1FANSA
LSWM1FANSA-SN
FAN-40F-1-D
LSWM1FANSAB
LSWM1FANSAB-SN
FAN-40B-1-C
LSWM1BFANSC
LSWM1BFANSC-SN
LSWM1BFANSCB
LSWM1BFANSCB-SN
6-53
Airflow direction
From the power module side to the port side
The following uses LS-6850-56HF as an example:
From the port side to the power module side
The following uses LS-6850-56HF as an example:
From the power module side to the port side
From the port side to the power module side