3. Commit the configuration to activate it on the firewall.
[edit]
root@# commit
Configure System Attributes
1. Log in as the administrative user that you configured earlier.
2. Configure the name of the firewall. If the name includes spaces, enclose the name in quotation marks
(" ").
configure
[edit]
admin@# set system host-name
3. Configure the IP address and prefix length for the firewall Ethernet interface.
[edit]
admin@# set interfaces fxp0 unit 0 family inet address
4. Configure the traffic interface.
[edit]
admin@# set interfaces ge-4/2/0 unit 0 family inet address
admin@# set interfaces ge-4/3/5 unit 0 family inet address
5. Configure the default route.
[edit]
admin@# set routing-options static route 0.0.0.0/0 next-hop
host-name
address/prefix-length
address/prefix-length
address/prefix-length
gateway
23