Memory Switch Setup Mode - Epson TM-U220-i Technical Reference Manual

Memory Switch Setup Mode

You can configure the memory switches (customized values) of the printer.
❏ Basic Serial communication condition (Serial communication) *
❏ Receive buffer full release condition (Msw 8-7)
❏ Roll paper width (Customize value)
❏ Cover open status (Msw 8-5)
*: This function is disabled on this product.
Entering Memory Switch Setting Mode
Follow the steps below to run this mode.
1
Make sure that roll paper is loaded and the printer is turned off.
2
Open the roll paper cover.
3
Press the FEED button while turning the power on.
4
When the ERROR LED comes on, goes out, and then comes on again,
release the FEED button.
5
Press the FEED button 2 times, and then close the roll paper cover.
The setting items and operation method guidance are printed. Perform the operations
indicated in the guidance information.
When the settings are complete, they are saved. The printer is initialized, and then returns to normal
printing status.
64