Restarting The Device; Removing The Device, Mount, And Suction Cup; Removing The Device From The Mount; Removing The Mount From The Suction Cup - Garmin DEZL LGV500 Owner's Manual

Restarting the Device

You can restart your device if it stops functioning.
Hold the power button for 12 seconds.

Removing the Device, Mount, and Suction Cup

Removing the Device from the Mount

1 Press the release tab or button on the mount.
2 Tilt the bottom of the device upward, and lift the device from the mount.

Removing the Mount from the Suction Cup

1 Turn the device mount to the right or left.
2 Apply pressure until the socket on the mount releases the ball on the suction cup.

Removing the Suction Cup from the Windshield

1 Flip the lever on the suction cup toward you.
2 Pull the tab on the suction cup toward you.

Changing the Fuse in the Vehicle Power Cable

When replacing the fuse, do not lose any of the small pieces and make sure they are put back in the proper
position. The vehicle power cable does not work unless it is assembled correctly.
If your device does not charge in your vehicle, you may need to replace the fuse located at the tip of the vehicle
adapter.
1 Rotate the end piece
TIP: You may need to use a coin to remove the end piece.
2 Remove the end piece, the silver tip
3 Insert a new fast-blow fuse that has the same current, such as 1 A or 2 A.
4 Place the silver tip in the end piece.
5 Push in the end piece and rotate it clockwise to lock it back into the vehicle power cable

The suction cup will not stay on my windshield

1 Clean the suction cup and windshield with rubbing alcohol.
2 Dry with a clean, dry cloth.
3 Mount the suction cup

Troubleshooting

counter clockwise to unlock it.
, and the fuse
Troubleshooting
(Mounting and Powering the dēzl Device in Your Vehicle,
NOTICE
.
.
page 2).
53