3Com 3C509B-TPC User Manual page 64

Book Page 9 Friday, June 11, 1999 3:02 PM
Follow these steps to change the configuration settings:
1 Run the installation program described in "Configuring the
NIC" earlier in this chapter.
2 From the main menu (see Figure 4-1), select Configuration
and Diagnostic Program.
3 If multiple NICs are installed in the PC, use the arrow keys
to select the NIC you want to configure. Press Tab to move
to the Select button and press Enter.
4 Press Tab to display the dialog box, and then select the
option that you want to change. Press Enter.
5 Use the arrow keys to scroll through the list of settings for
that option. Select a setting and press Enter.
6 Continue this procedure for other options. For more
information on a specific option, select the option and
press F1.
7 To save the new settings, select OK and press Enter.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Changing Configuration Settings 4-9