3Com 3C509B-TPC User Manual page 35

Book Page 12 Friday, June 11, 1999 3:02 PM
2-12 C 2: S
HAPTER ETUP FOR
Follow these steps to install and configure the 3C509B NIC under
Windows NT:
1 Install the NIC in your PC. See Chapter 1.
2 Boot Windows NT.
3 Double-click the My Computer Icon, double-click the
Control Panel icon, and then double-click the Network icon.
The Network screen appears.
4 Click the Adapters tab, click Add, and then click Have Disk.
The Insert Disk screen appears.
5 Insert EtherDisk diskette 1 in drive A.
6 Ensure that the path to drive A appears in the entry box,
and then click OK.
The Select OEM Option screen appears.
7 If not already selected, select 3Com EtherLink III (3c509) ISA
Adapter and click OK.
The 3Com EtherLink III (3c509) ISA Adapter Bus Location
screen appears.
8 Ensure that Bus Type: ISA and Bus Number: 0 appear in their
respective selection boxes, and then click OK.
Windows NT Setup copies the required files to your hard disk. The
3Com Installation Wizard starts.
The next step is to use the 3Com Installation Wizard to install the
NIC software and configure the 3C509B NIC. Go to Chapter 3.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
C I
USTOM NSTALLATION