Table of Contents
Advertisement
Preheat the two ovens. Heat
up one oven at a time.
Set the functions listed
below, if applicable.
1. Set the function
maximum temperature.
2. Let the appliance operate for 1 hour.
3. Set the function
maximum temperature.
5. HOB - DAILY USE
WARNING!
Refer to Safety chapters.
5.1 Heat setting
Symbols
1 - 9
Use the residual heat to
decrease energy
consumption. Deactivate the
cooking zone approximately
5 - 10 minutes before the
cooking process is
completed.
6. HOB - HINTS AND TIPS
WARNING!
Refer to Safety chapters.
6.1 Cookware
The bottom of the cookware
must be as thick and flat as
possible.
Cookware made of
enamelled steel and with
aluminium or copper
bottoms can cause the
colour change on the glass-
ceramic surface.
and the
and the
Function
Off position
Heat settings
4. Let the appliance operate for 15
minutes.
5. Set the function
maximum temperature.
6. Let the appliance operate for 15
minutes.
Accessories can become hotter than
usual. The appliance can emit an odour
and smoke. This is normal. Make sure
that the airflow in the room is sufficient.
Turn the knob to a necessary heat
setting.
To complete the cooking process, turn
the knob to the off position.
5.2 Residual heat indicator
WARNING!
There is a risk of burns from
residual heat.
The indicator comes on when a cooking
zone is hot.
6.2 Examples of cooking
applications
The data in the table is for
guidance only.
ENGLISH
9
and the
Advertisement
Table of Contents
