Entering Osd Setup Menu - Speco DVR-16TS Series Owner's Manual

3.4

Entering OSD Setup Menu

The OSD Main menu contains a list of items that are used to configure the
DVR-4TN/ DVR-8TN/ DVR-16TN series. To enter the Main menu, correct
Administrator or User password is required.
Three sets passwords are offered for different Administrators and Users--if
there is more than one.
To enter OSD Main menu, press MENU and then enter either Administrator or
User password. The Password Verification screen will then display as follows.
The default passwords are shown in the following table. The same passwords
are used for entering the remote viewing software SpecoRemote
Administrator Passwords
It is strongly recommended that you change the passwords to prevent
unauthorized access to the unit.
After entering the correct password, the Main menu is displayed.
1. System Setup
2. Monitor Setup
3. Camera Setup
4. Record Setup
5. Sequence Setup
6. Event Setup
7. Database Setup
8. Configuration
9. Video Export
10. Shutdown
24
Password Verification
Press Channel Keys To Enter Password
Press ◄ Key To Delete
NOTE: If entering wrong password for 3 times, the system will be
locked out, and you will not be able to enter OSD menu within 2
minutes.
1234
________
(4-8 Digits)
User Passwords
4321
Main Menu
User's Manual
TM
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/06
.