Table of Contents
Advertisement
Removing the Side-Discharge Chute
To remove the side-discharge chute, reverse the steps in
Operating Tips
General Tips
•
Review the safety instructions and read this
manual carefully before operating the machine.
•
Clear the area of sticks, stones, wire, branches,
and other debris that the blades could hit and
throw.
•
Keep everyone, especially children and pets, away
from the area of operation.
•
Avoid striking trees, walls, curbs, or other solid
objects. Never deliberately mow over any object.
•
If the machine strikes an object or starts to vibrate,
immediately shut off the machine, wait for all
moving parts to stop, remove the battery pack
from the machine, and examine the machine for
damage.
Figure 22
Installing the Side-Discharge Chute (page
•
Maintain sharp blades throughout the cutting
season. Periodically file down nicks on the blades.
•
Replace the blades when necessary with original
Toro replacement blades.
•
Mow only dry grass or leaves. Wet grass and
leaves tend to clump on the yard and can cause
the machine to plug or the motor to stall.
•
Clean the underside of the machine deck after
each mowing. Refer to
Machine (page
Cutting Grass
•
Grass grows at different rates at different times
of the year. In the summer heat, it is best to cut
grass at the 51 mm (2 inch), 64 mm (2-1/2 inch),
or 83 mm (3 inch) cutting-height settings. Cut only
about a third of the grass blade at a time. Do not
19
Cleaning under the
21).
g235903
18).
Advertisement
Table of Contents
