During Operation
Starting the Machine
1.
Ensure that the battery pack(s) are installed in the machine; refer to
2.
Insert the electric-start button into the electric-start switch (A of
3.
Squeeze the blade-control bar and hold it to the handle for 2 seconds (B of
4.
Press the electric-start button and keep it pressed until the motor starts (C of
Operating the Self-Propel Drive and Engaging the Blades
To operate the self-propel drive, pull and hold the drive bar to the handle
•
To engage the blades, pull the blade-control bar to the handle
•
To disengage the blades, release the blade-control bar
Figure
Figure 13
(Figure
Figure 14
(Figure
(Figure
15.
Figure 15
15
Installing the Battery Pack (page
13).
Figure
13).
Figure
13).
14).
15).
13).
g426569
g426534
g426582