Operation
Before Operation
Installing the Battery Pack
Important:
Use the battery pack only in temperatures that are within the appropriate range; refer
to
Specifications (page 11)
1.
Make sure that the vents on the battery are clear of any dust and debris.
2.
Lift up the battery-compartment lid (A of
3.
Line up the cavity in the battery pack with the tongue on the machine and slide the battery pack into the
compartment until it locks into place (B of
4.
Close the battery-compartment lid (C of
Note:
If the battery-compartment lid does not close completely, the battery is not fully installed.
Adjusting the Handle Height
You can raise or lower the handle to 1 of 3 positions that is most comfortable to you
1.
Remove both handle bolts and the corresponding nuts.
2.
Move the handle to the desired height position.
3.
Secure the handle with the previously removed bolts and corresponding nuts.
Figure
10).
Figure
10).
Figure
10).
Figure 10
Figure 11
13
(Figure
11).
g426513
g426489