Table of Contents
Advertisement
Adjusting the Anti-Scalp
Rollers
Whenever you change the height-of-cut, adjust the
height of the anti-scalp rollers.
1.
Park the machine on a level surface, disengage
the blade-control switch, and engage the parking
brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Adjust the anti-scalp rollers as shown in
27,
Figure
28, and
Figure 27
1. Anti-scalp roller
2. Spacer
3. Bushing
Figure 28
1. Anti-scalp roller
2. Bushing
Figure
Figure
29.
4. Flange nut
5. Bolt
3. Flange nut
4. Bolt
1. Anti-scalp roller
2. Spacer
3. Bushing
Adjusting the Flow Baffle
Knob
This procedure applies only to machines with the
flow baffle knob. Certain models have nuts and bolts
instead of the flow baffle knob that you can adjust the
same way.
g029955
You can adjust the mower discharge flow for different
types of mowing conditions. Position the knob and
baffle to give the best quality of cut.
1.
Park the machine on a level surface, disengage
the blade-control switch, and engage the parking
brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Loosen the knob.
4.
Slide the knob to the desired position.
5.
Tighten the knob.
g029956
28
Figure 29
4. Flange nut
5. Bolt
g029957
Advertisement
Table of Contents
