Connecting External Data Media; Removing The External Data Media - Grundig FINE ARTS 55 FLX 9490 SL Manual

Usb­oPeRaTIon
Connecting­external­data­media
It is advised to put the television on stand-by
mode before connecting the external data me-
dium. Connect the device and then switch the
television on again.
Before disconnecting the data medium, the tele-
vision must first be switched to standby, other-
wise files can be damaged.
notes:
Both sockets »Usb« at the side of the televi-
7
sion supports 500 mA current according to
the USB standard. Devices such as external
hard disk and etc. that consume more power
can only be connected to the
interface of the television.
To get higher efficiency from your devices
7
supporting USB 3.0 it is recommended to
connect to »Usb­3.0« interface.
If you are using a power cable for the exter-
7
nal hard disk that you have connected to the
»Usb­ 3.0« USB interface, then the power
cable of the external hard disk must also be
unplugged when the TV is turned off.
4k2k image signal can only be received
7
from »HDMI5­4k2k« or »Usb­3.0« inputs.
From »Usb­3.0« input, 4k2k image signal
7
can be received up to 15 Hz.
You must not disconnect the USB Device
7
from the TV while a file on the USB Device is
being read by the TV.
A bi-directional data transfer as defined for
7
ITE (Information Technology Equipment) de-
vices in EN 55022/EN 55024 is not pos-
sible.
USB transfer is not an operating mode in it-
7
self. It is only an additional function.
­--------------------------------------------------------------------------------------------
»Usb­ 3.0«
1 Connect the »Usb­3.0« USB interface on
the television and the related data output
on the external device (external hard disk,
digital camera, card reader or MP3 player)
with a USB cable;
or
plug the memory stick in one of the »Usb«
sockets at the side of the television.
Removing­the­external­data­
media
Before removing the external data medium, log
off the data medium.
1 Open the menu with »MenU«.
2 Select the menu item »Media Player« with
»
3 Select the Option »PVR« with »
and press »oK« to confirm.
4 Select the »Media Options« with »
(green).
5 Select the line »Disk Management« with
»
6 Select the line »Safely Remove Disk« with
»
7 Remove the data medium from the socket.
> <
« or » « and press »oK« to confirm.
« or » « and press »oK« to confirm.
V Λ
« or » « and press »oK« to confirm.
V Λ
< >
« or » «
«

enGlIsH 61­