Table of Contents
Advertisement
UsbReCoRDInG
Recordingaprogrammefromthe
channellist
1 Press »oK« to open the channel list.
2 Select a channel with »
»oK« to confirm.
3 Press »eXIT« to exit from the channel list.
4 Press »
« (red) to start recording.
– R ecording information is displayed:
Recording symbol, channel name, pro-
gramme time and recording time.
– T hese information will disappear after a
short while. Recording symbol and record-
ing time will appear on the lower right
corner of the screen.
5 To end the recording, press »
6 Press »
« (green) to accept;
or
press »
« (red) to continue the recording.
Programmesettingforrecord-
ing
...withelectronicprogrammeguide
Electronic programme guide data can be used
for recording.
25 EPG reminder and/or recorder can be set in
total.
1 Press »GUIDe« to open the electronic
programme guide.
2 Select the preferred TV program with »
or »
«.
Λ
– I nformation about the actual TV program
is displayed.
<
>
3 Press »
« or »
« to select the TV program
you want to record.
4 To add broadcasts to the timer press »oK«.
– I nformation for the TV program to be
recorded will be displayed.
5 Select the line »Record« with »
»oK« to confirm.
– R ecording data range appears.
6 Press »oK« to confirm.
7 Press »eXIT« to end the menu.
-------------------------------------------------------------------------------------------
<
>
« or »
« and press
«.
7
«
V
>
« and press
note:
If the data for the recording is to be changed,
7
open menu with »MenU«. Select the menu
item »Schedule List« with »
with »oK«. Press »
data and and save it with »
notes:
A warning is displayed before the timer re-
7
cording starts and counts down for 10 sec-
onds to allow you to switch to the channel.
At the end of 10 seconds, the channel to be
recorded appears automatically.
If the timer recording starts during playback,
7
playback stops. If you do not select »Yes« in
the warning prompt, recording will start auto-
matically at the end of the countdown.
Only for UPC customers Note: Parts of previ-
7
ous or next files can be included into the re-
cord while the programme is being recorded
resulting from possible Programme Guide er-
rors. In such cases, keep in mind that the high-
est family protection level will apply for the
whole recording if one or more of those pro-
grammes have any level of family protection.
setthelead/follow-uptime
With this function you can change the recording
time set by the electronic TV guide.
If you think that a program will start a few min-
utes earlier or will end several minutes later, you
can „add" up to 60 minutes to this time
1 Open the menu with »MenU«.
2 Select the menu item »Schedule List« with
>
<
»
« or »
« and press »oK« to confirm.
3 Activade the »Padding Time« menu with
»
« (blue).
4 Change the start time with »
5 Use »
« to switch to the line »End« and
V
change the end time with »
6 Save the setting with »
7 Press »eXIT« to end the menu.
>
« and confirm
« (green), change the
« (blue).
<
>
« or »
«.
<
>
« or »
«.
« (green).
ENGLISH
57
Advertisement
Table of Contents
