Connecting External Data Media; Removing The External Data Media - Grundig 47 VLE 983 WH Manual

usB­operAtion
Connecting­external­data­media­
Before connecting the external data medium it is
recommended to switch the television to stand-by
mode.
Before removing the external data medium,
the television set must be switched to standby,
so that no data loss occurs.
notes:
The »usB1« socket of the television set
7
s upplies a maximum power of 500 mA in
accordance with USB specifications. Exter-
nal hard disks which require more power
may therefore only be connected to the
»usB2­(HDD)« of the television set.
If you use a network cable for external hard
7
disks which are connected to the
(HDD)« socket on the television, this net-
work cable must also be disconnected from
the power supply when the television is
switched off.
External data media may not be disconnect-
7
ed from the television set while files on the
data medium are being accessed.
A bi-directional data transfer as defined for
7
ITE (Information Technology Equipment)
d evices in EN 55022/EN 55024 is not
possible.
U SB transfer is not in itself an operating
7
mode. It is only an additional function.
­ 5 0
ENGLISH
­---------------------------------------------------------------------------------------------------------------
1 Press »
»usB2­
on the television from standby mode.
2 Connect the
television and the corresponding socket on
the data device (external hard drive, digital
camera, card reader or MP3 player) using a
USB cable;
or
insert the USB plug of the USB memory stick
into the »usB1« socket of the television set.
removing­the­external­data­
media
Before removing the external data medium, log
off the data medium.
1 Open the menu with »menu«.
2 Select the menu item »USB RECORDING«
with »
confirm.
3 Select the line »Safely Remove Disk« with
»
note:
7
8 «, »1...0« or »p+« or »p-« to switch
(HDD)« socket of the
»usB2­
« or » « and press »oK« to
v Λ
« or » « and press »oK« to confirm.
v Λ
The data medium can now be removed from
the socket.