Table of Contents
Advertisement
seTTInGs
Tuningcabledigitaltelevisionchan-
nels(DVb-C)
26 Select the option »Cable« with »
and press »oK« to confirm.
27 Select the line »Scan Type« with »
»
«.
Λ
Select the option »Quick« or »Full« with »
>
or »
«.
– » Quick« scanning function sets the chan-
nels according to the cable operator
information in the broadcasting signal.
– » Full« scan function scans the entire fre-
quency range selected. With this search
option, search can take a long time. This
search type is recommended. Some cable
providers do not support »Quick« scan.
note:
You can speed up the search. To do this,
7
frequency and network ID information are
required. You may get this data from your
cable operator or find it in the Internet fo-
rums.
28
Use »
« to select the push button »Next
V
Page« and confirm with »oK«.
note:
P erform Channel Type selection. Press »
7
>
or »
« to select whether you want to search
for only digital channels (Digital), only Ana-
log channels (Analog) or both (Digital +
Analog) and press »oK« to select and mark
or unmark the »Digital« and »Analog« items.
29 Press »
« (red) to start searching.
– T he »Automatic Channel Search« menu
appears, and the search for TV channels
begins.
– T he scan is complete as soon as the
»Search is completed!« appears.
30 Select the »Channel Editor« with »
18
ENGLISH
------------------------------------------------------------------------------------------------------------------
<
« or »
« or
V
« (red).
Tuningterrestrialdigitaltelevision
channels(DVb-T)
>
«
31 Select the option »Air« with »
press »oK« to confirm.
Important:
The antenna power supply (5V ) may only
7
<
«
be switched on if the antenna is an active
indoor antenna with a signal amplifier and
it is not already supplied with a voltage via
a mains plug (or similar supply). Otherwise
you may cause a short circuit and irrepara-
bly damage your antenna.
32 Select the line »Active Antenna Power« with
»
« or »
V
Switch on the antenna power supply for the
antenna with »
33 Select the line »Next Page« with »
»
« and press »oK« to confirm.
Λ
note:
P erform Channel Type selection. Press »
7
>
or »
« to select whether you want to search
for only digital channels (Digital), only Ana-
log channels (Analog) or both (Digital +
Analog) and press »oK« to select and mark
or unmark the »Digital« and »Analog« items.
<
«
34 Press »
« (red) to start searching.
– T he »Automatic Channel Search« menu
appears, and the search for TV channels
begins.
– T he scan is complete as soon as the
»Search is completed!« appears.
35 Select the »Channel Editor« with »
<
«.
Λ
<
>
« or »
« (»On«).
>
« or »
« and
« or
V
<
«
« (red).
Advertisement
Table of Contents
