Connecting External Data Media; Settings For Usb Recording - Grundig 55 VLE 9480 SL Manual

usB­reCorDinG
Connecting­external­data­media­
notes:
Before connecting the external data medium
7
it is recommended to switch the television to
stand-by mode.
Before removing the external data medium,
7
the television must be switched to standby,
so that no data loss occurs.
Your television features two USB sockets,
7
»usB1« and »usB2­(HDD)«.
»usB2­ ( HDD)« i s u sed t o c onnect d ata m edia,
which require an additional power supply
– for example, external hard disks.
1 Connect the
»usB2­
t elevision and the corresponding socket of
the data medium (external hard disk) using
a USB cable;
or
insert the USB plug of the USB memory stick
into the »usB1« socket of the television.
­ 5 2
ENGLISH
­ - -------------------------------------------------------------------------------------------------------------
(HDD)« socket of the
notes:
The »usB1« socket of the television sup-
7
plies a maximum power of 500 mA in ac-
cordance with USB specifications. External
hard disks which require more power may
therefore only be connected to the »usB2­
(HDD)« of the television.
If you use a network cable for external hard
7
disks which have been connected to the
»usB2­(HDD)« socket of the television, this
network cable must also be disconnected
from the power supply when the television is
switched off.
External data media may not be disconnect-
7
ed from the television while files on the data
medium are being accessed.
settings­for­usB­recording
selecting­the­menu
1 Open the menu with »menu«.
2 Select the menu item »USB RECORDING«
with » « or » « and press »oK« to confirm.
v Λ
– T he »USB RECORDING« menu appears.
USB RECORDING
PRnP
Auto Preview
Permanent Timeshift
Manage data medium
Safely Remove Disk
Disk
Capacity Used
Used (MB)
Total (MB)
Remaining SD recording time
Remaining HD recording time
Exit
Back
08.08.2012
15:46
OK
On
On
USB
%3
1249
38145
1,008 min
288 min